Home / Products / 24V 60Ah LiFePO4 Battery | Trolling Motor, 1,536Wh, JBD Smart BMS

24V 60Ah LiFePO4 Battery

A 24V 60Ah LiFePO4 battery for trolling motors, RVs and solar. Built fresh to order, bench-tested before shipping.For trolling motors, RVs and solar.

1,536Wh
Total Energy
~12 kg
300×180×160 mm
80 Cells
LTT 32700

Built to order. Bench-tested before shipping.

Technical Specifications

Voltage / Capacity / Energy25.6V nominal / 60Ah / 1,536Wh (Cutoff 20.0V / Full charge 29.2V)
Cells80 × LTT 32700 LiFePO4, 8S10P
BMSJBD Smart BMS, 60A (peak 180A) / 100A (peak 300A)
Dimensions / Weight300×180×160 mm (11.81×7.09×6.30 in), approx. 12 kg (approx. 26.46 lb)
Charger29.2V 10A Fast Charger, about 6-7 hours
Cycle Life / Warranty2,000+ cycles to 80% DoD, 2-year warranty
TemperatureCharge 0-45°C / Discharge -20-60°C / Storage 0-35°C
Fit check: Allow 5-10 mm around the pack for the PVC wrap and sealant in tight battery boxes or boat lockers.

Pick the Right BMS

Your BOOANT battery uses a JBD Smart BMS. Thrust helps you find a tier, but your motor's max amp draw decides it.Motor amps decide the tier.

60A
Single Trolling Motor
45-80 lbs thrust
Up to 1,200W / Peak 180A
Continuous 60A discharge
Ideal for kayaks, jon boats, 55-80 lb Minn Kota / MotorGuide single motors.Kayaks, jon boats, single motors.
100A
Dual Motor / Heavy Loads
80-112+ lbs thrust
Up to 2,000W / Peak 300A
Continuous 100A discharge
Ideal for twin motors, tournament bass boats, heavy river current and spot-lock.Twin motors, bass boats, spot-lock.

Your BOOANT battery uses a JBD Smart BMS

  • JBD App: Monitor cells, temp and capacity in the app, switch discharge on/off from your phone.Monitor cells and temp in the app.
  • Example: Single 55 lbs motor? 60A. Twin motors or 100+ lbs thrust? 100A.
  • Don't overbuy: Bigger BMS doesn't make a small motor faster.
  • Motor amps decide: Check your motor's max amp draw. Unsure? Message us with your motor model.Check your motor's max amps.

Fireproof Safety Bag Included

Every 24V 60Ah pack ships with a fireproof safety bag. It helps contain flames and heat if a cell ever fails, and reduces the risk to your boat and gear. Store the pack in the bag when not in use.Fireproof bag helps contain flames and heat.

Fast Charger

29.2V 10A
About 6-7 hours to full
Aluminum case, cooling fan
CC/CV, auto stop when full
Red: Charging or fault
Green: Fully charged or standby on AC power
Fuse250V/20A replaceable cartridge fuse, on the charger.250V/20A replaceable.
Power leadAC lead included, plug type by country.AC lead by country.
Plug inMains first, then battery.
UnplugBattery first, then mains.
Charge rate10A, about 0.17C, gentle on cells.10A, 0.17C.
VentilationKeep vents clear, charge in open air.Keep vents clear.
Warranty covers the pack only, not the charger.

Pick a Connector That Fits Your BMS

Choose the plug that matches your BMS and motor. All connectors are factory-installed, no soldering needed.Factory-installed, no soldering needed.

QS8
180A
Best for 100A BMS
High-power anti-spark, best for high-thrust rigs and dual motors.
XT90F/M
90A
Best for 60A BMS
Compact, vibration-proof, high-temp nylon for trolling motors.
XT60F/M
60A
Compact, for kayaks
Lightweight and secure, ideal for kayaks and portable setups.
Anderson SB50
50A
Marine standard plug
Industry standard quick-disconnect for boat consoles.

Need Wire only, or none of these fits your motor? Contact us and we will help you pick the right one.

Built Fresh. Ready to Launch.

Built to order with genuine LTT 32700 cells. Bench-tested before shipping. Shipped DDP with duties prepaid.Built to order. Bench-tested. Shipped DDP.

What's Included

  • 24V 60Ah LiFePO4 battery pack
  • 29.2V 10A Fast Charger
  • AC power lead (plug type by country)
  • Discharge extension cable (by connector)
  • Fireproof safety bag
  • JBD App download QR code

FAQ

Which BMS should I choose, 60A or 100A?+
Choose 60A for a single trolling motor up to 80 lbs thrust (up to 1,200W). Choose 100A for twin motors, 80-112+ lbs thrust, or heavy loads like spot-lock in current (up to 2,000W). Your motor's max amp draw decides it.
Will this battery fit my boat?+
The pack measures 300×180×160 mm (11.81×7.09×6.30 in) and weighs about 12 kg. Measure your battery box or locker first, and allow 5-10 mm around the pack for the PVC wrap and sealant.
How long does it take to charge?+
About 6-7 hours from empty with the included 29.2V 10A Fast Charger. The charger uses CC/CV and stops automatically when the pack is full. Charge time is about 6 hours theoretical plus 1 hour for balancing.
Can I use my lead-acid charger?+
No. Lead-acid chargers use the wrong voltage profile and can damage LiFePO4 cells or trip the BMS. Use only the included 29.2V 10A LiFePO4 charger, which delivers the correct CC/CV curve for all 8 cell banks.
Is this battery waterproof?+
The pack is water-resistant, not waterproof. The PVC wrap and top sealant resist spray and splashes from the bilge, but do not submerge it. Store the pack in a dry locker when not in use.
How do I monitor the battery on the water?+
The JBD Smart BMS connects to your phone via Bluetooth. The app shows state of charge, individual cell voltages, temperature, and real-time current draw. You can also switch discharge on or off from the app without opening the hatch.
Which connector should I choose?+
QS8 (180A) fits the 100A BMS and high-thrust rigs. XT90F/M (90A) and XT60F/M (60A) fit the 60A BMS. Anderson SB50 is the standard marine quick-disconnect. If unsure, contact us with your motor model.
How long will this battery last?+
LiFePO4 cells last 2,000+ cycles to 80% capacity, far longer than lead-acid. The pack has a 2-year warranty. With normal use and proper charging, expect many years of service on the water.